- BACE Vertical Baler
V63-865
This non-ferrous scrap baler produces more than 150,000 lbs. of compact force at more than 80 PSI of platent pressure. The 65” stroke cylinder provides maximum compaction, extending to within a few inches of the floor. Manufactured for tin, aluminum, brass, bronze, and other non-ferrous metals, it also bales paper, paper cores, plastics, and other recyclables.
- Ideal for: Big Box Retailers, Commissaries, Distribution Centers, Grocery Stores, Home Retailers, Hospitals, National Accounts, Pharmacies, Recyclers, Schools, Universities, Warehouses

Performance Specs
Description | Value |
---|---|
Nominal Bale Size | 60" x 30" x 48" |
Bale Weight | Up to 2000 lbs OCC |
Bale Volume | 50 cu. ft. |
No. of Bale Tie Slots | 5 |
Compact Force lbs - Normal / Maximum | 150,798 |
Platen Pressure | 84 PSI |
Average Cycle Time | 53 Seconds |
Loading Height | 53.50" |
Ejector System | Semi-Automatic |
Full Bale Switch |
Hydraulic / Electrical Specs
Description | Value |
---|---|
Motor HP | 10 HP Submersible - Dual Pump with Regen |
Voltage 3 Phase | 208V, 230V, 480V |
Full Load Amps (A=Amps) | 32A, 28A, 14A |
Pump GPM | 14 / 4 Dual Pump with Regen |
Normal System Pressure PSI | 3000 |
Max. System Pressure PSI | |
Cylinder Bore x Stroke | 8" x 65" |
Hydraulic Tank-Capacity Gallons | 60 |
Additional hydraulic/electrical configurations are available. Please contact BACE for more information. |
Available Options
- Counter Weighted Floppy Retainer Dogs, Feed Chute, Oil Heater, Slotted Front Door, Weather Proof Package, Wire Guides (allows for front bale tie-off)

Due to continual product improvement BACE reserves the right to change specifications without notice.
The information and pictures presented on this page are for illustrative purposes only.
The information and pictures presented on this page are for illustrative purposes only.