Menu
- BACE Vertical Baler, VMAX
VMAXX-26
The VMAX26 is designed to meet the specifications of your client’s back haul program without compromising the rigorous bailing expectations of the backroom personnel.
This baler produces bales specifically weighted and dimensioned to fit 26 into a container improving container weights from the client’s approximately 30,000 lbs to over approximately 55,000 lbs thereby providing up to a 73% increase.
Performance Specs
| Description | Value |
|---|---|
| Nominal Bale Size | 72" x 42" x 45" |
| Bale Weight | Up to 2000 lbs OCC |
| Bale Volume | 79 cu. ft. |
| No. of Bale Tie Slots | 7 |
| Compact Force lbs - Normal / Maximum | 125,663 / 150,798 |
| Platen Pressure | 42 PSI |
| Average Cycle Time | 55 Seconds |
| Loading Height | 54.50" |
| Ejector System | |
| Full Bale Switch |
Hydraulic / Electrical Specs
| Description | Value |
|---|---|
| Motor HP | 10HP Submersible |
| Voltage 3 Phase | 208V, 230V, 480V |
| Full Load Amps (A=Amps) | 32A, 28A, 14A |
| Pump GPM | |
| Normal System Pressure PSI | 2500 |
| Max. System Pressure PSI | 3000 |
| Cylinder Bore x Stroke | 8" x 48" |
| Hydraulic Tank-Capacity Gallons | 40 gal |
| Additional hydraulic/electrical configurations are available. Please contact BACE for more information. | |
Available Options
- International Safety Option With CAT3, Oil Heater, Rear Wire Guides, Regen Circuit, Single Phase Power Unit, Slotted Front Door, Weather Proof Package
Due to continual product improvement BACE reserves the right to change specifications without notice.
The information and pictures presented on this page are for illustrative purposes only.
The information and pictures presented on this page are for illustrative purposes only.
