Menu
- BACE Stationary Compactor
C2HD
For heavy commercial and light industrial applications, the C2HD model is designed for durability and long life. The BACE heavy duty units are built with massive structural reinforcement in the breaker bar and charge box areas.
Performance Specs
| Description | Value |
|---|---|
| MFG Rating CU/YD | 2 |
| Ram Face (H”xW”) | 29 x 60 |
| Ram Penetration (in) | 11 |
| Cylinder Bore//Stroke/Rod (in) | 6 x 56 x 4 |
| Cylinder Bore//Stroke | |
| Motor (HP) | 10 |
| Voltage 3 Phase | |
| Full Load Amps (A = Amps) | |
| Pump GPM | 10.5 |
| Avg. Cycle Time (sec) | 61 |
| Clear Top Opening (in) | 46 x 60 |
| Discharge Opening (in) | 37 x 60 |
| Hydraulic Pressure PSI Normal/Maximum | 2200 / 2600 |
| Force Rating (lb) Normal/Maximum | 66,202 / 73,512 |
| Approx. Compactor Shipping Weight (lbs) | 5700 |
Construction Specs
| Description | Value |
|---|---|
| Charge Box Sides (in) | ¼ |
| Charge Box Floor (in) | ½ |
| Ram Face (in) | ⅝ |
| Ram Bottom (in) | ⅜ |
| Ram Top (in) | ⅜ |
| Breaker Bar Structural Angle | 6" x 8" x 1" |
| Additional hydraulic/electrical configurations are available. Please contact BACE for more information. | |
Available Options
- Advanced / Full Lights, Auto Timer Start, Doghouse; Hoppers; Chute; etc., Fabricated Options, Oil Heater, Ozone Odor Control
Due to continual product improvement BACE reserves the right to change specifications without notice.
The information and pictures presented on this page are for illustrative purposes only.
The information and pictures presented on this page are for illustrative purposes only.
